Navigate To Point Of Interest (Poi); Navigate To A Waypoint; Navigate A Trail - Lowrance iFinder Explorer Operating Instructions Manual

Navigate to Point of Interest (POI)

For POIs in view on the map, you can easily use the Navigate to Cursor
command above. Use the cursor to select the POI. The other method
involves searching for POIs with the Find command. (see Sec. 6,
Searching, for detailed instructions on POI searches.)
After selecting a POI and pressing
tion screen appears (with phone number, position, etc.). The
is highlighted in the command box. To navigate to that POI, press
the iFINDER will display navigation information to that location.

Navigate to a Waypoint

You can select any waypoint visible on the Map Page with the cursor,
then use the Navigate to Cursor command. You, however, can avoid
scrolling the map to pick your waypoint if you use the Find commands:
1. Press |↓ to
FIND
waypoint, press
point list), press ↓|
2. If your waypoint list is a long one, you can search for a waypoint by
spelling its name in the
character, then press → to move the cursor to the next character and re-
peat until the name is correct, then press
3. If you don't want to spell out the name, you can jump directly to the
box by pressing
F I L
IND N IST
press and the waypoint information screen appears with the
ENT
command selected.
4. To begin navigating to the waypoint, press

Navigate a Trail

1. Press
MENU
pears.
M W
Y AYPOINTS
or to look by name (scroll through the entire way-
ENT
. For this example, let's look by name.
ENT
F
IND
ENT
| |↓ to
MENU M
Trails Menu, Advanced Mode.
|
FIND ENT
and press
box. Press ↑ or ↓ to change the first
B N
Y AME
ENT
. Use ↑ or ↓ to select the waypoint name,
|
T ENT
Y RAILS
54
, the Point of Interest informa-
. To look up the nearest
ENT
to jump to the list below.
.
ENT
and the following screen ap-
command
G T
O O
and
ENT
G T
O O