Lowrance LMS-522c iGPS Installation And Operation Instructions Manual page 130

After the unit has acquired a position:
1. Press |↓ to
WPT
2. You could search the entire restaurant category, but in this example
we will narrow our search. Press → to
|
F C ENT
OOD HAINS
3. The unit says it is calculating, then a list of restaurants appears,
with the closest highlighted at the top of the list. The restaurant far-
thest from you is at the bottom of the list.
Find Waypoint Menu (left). Category Selection menu (center). List of
4. You could scroll through the list to select another restaurant, but for
now we will just accept the nearest one. Press
The POI Information screen shows name, street address, phone num-
ber, latitude/longitude, distance to restaurant and its compass bear-
ing. In the first figure (left) Go to Waypoint is selected. In the second
5. The POI information screen appears. If you wanted to navigate
there, you could press Enter, since the Go To Waypoint command is
highlighted. We just want to see it on the map, so press ↓ to
| .
M ENT
AP
POI-R
ESTAURANTS
|↓ to
N
EAREST
the nearest restaurants (right).
figure (right) Find on Map is highlighted.
.
S
UBCATEGORY
| .
ENT
120
column|↓ to
.
ENT
F
AST
F O
IND N