Navigate To A Waypoint; Set Man Overboard (Mob) Waypoint - Lowrance GlobalMap 5200C GPS Operation Instructions Manual

Navigate to a Waypoint

You can select any waypoint visible on the Map Page with the cursor,
then use the Navigate to Cursor command (we'll describe how later in
this section.) However, you can avoid scrolling the map to pick your
waypoint if you use the Find Waypoint commands.
1. Press |→ to
WPT
↓ to
|
N ENT
EAREST
waypoint list, press
2. If your waypoint list is a long one, you can spell out the waypoint
name in the
F
IND
first character, then press → to move the cursor to the next character
and repeat until the name is correct, then press
below.
3. If the list is short, you can jump directly to the
pressing . Use ↑ or ↓ to select the waypoint name, press
ENT
the waypoint information screen appears with the
lected.
4. To begin navigating to the waypoint, press
Course line
(dotted)
Off course
range, set at
0.20 mile
Navigation Page, navigating toward waypoint 004 and leaving a trail.

Set Man Overboard (MOB) Waypoint

One of boating's most terrifying events is having a friend or family
member fall overboard. This situation can be deadly on any body of
water — fresh or salt. It's particularly dangerous at night or if you're
out of sight of land. Of course, the first thing to do is remain calm and
then use all standard safety procedures to rescue the person. This unit
has a man overboard feature that shows navigation data to the location
where the feature was activated.
www.Busse-Yachtshop.de
| . To look up the nearest waypoint, press
S ENT
AVED
; or, to look by name and scroll through the entire
. For this example, search by name.
ENT
box to search for it. Press ↑ or ↓ to change the
B N
Y AME
ENT
.
ENT
46
email: info@busse-yachtshop.de
to jump to the list
box by
F I L
IND N IST
ENT
command se-
G T
O O
Waypoint
Trail line
(solid)
Destination
name
and