Installation
14
Approved Venting Configurations for Horizontal Terminations
•
12' Maximum System Height
•
15' Maximum Offset
•
The termination must fall within the shaded area shown in the chart. Use the indicated restrictor
position.
•
One 45° elbow may be used. It must be positioned horizontally (connecting one horizontal section or
starter section to a horizontal section).
•
If using a Snorkel Termination (14" or 36") add the snorkel height to the vertical height (snorkel
terminations are used primarily for basement installations).
12' (max)
10 feet
5 feet
0 feet
Travis Industries
(for qualified installers only)
Restrictor Position # 1
Remove Diffuser Plate
1 0 0 - 0 1 1 4 2
Restrictor Position # 5
Remove Diffuser Plate
12' (max)
10 feet
5 feet
Restrictor Position # 1
Keep Diffuser Plate
0 feet
4 0 5 0 1 1 4