Sony SRW-5100 Operation Manual page 25

Note
The output phase is the same as that of the composite
signal output from the SD OUTPUT COMPOSITE
(MONITOR) connector.
Because the output phase changes with the operation mode
of this unit, use this for synchronization with the video
monitor.
f SD OUTPUT COMPOSITE (MONITOR)
connector (BNC)
Outputs an analog composite signal for a video monitor.
When the ALT/[F6] (CHARA SUPER) setting in the TC
menu is on, character signals such as time codes are
superimposed on the output.
2 DIGITAL I/O (input/output) section
a HD SDI (SDI video/audio) OUTPUT A/B
connectors (BNC)
These output three sets of SDI video/audio signals.
When the ALT/[F6] (CHARA SUPER) buttons are set to
ON in the TC menu, time data or other text data is
superimposed on the signal output from the MONITOR
connector.
b FORMAT CONV. (format-converted video/audio)
OUTPUT (OPTION) A/B connectors (BNC)
These output two sets of format-converted video/audio
signals.
When the ALT/[F5] (FC CHARA) buttons are set to ON in
the TC menu, the output has time data or other text
superimposed on the signal.
g TIME CODE OUT (time code output) connector
(XLR 3-31, male)
Outputs the playback time codes.
h CUE OUT (cue output) connector
(XLR 3-31, male)
Outputs cue track audio during HDCAM or Digital
Betacam playback.
Note
There is no cue track on an HDCAM-SR tape, and
therefore no output.
1 HD SDI OUTPUT A/B connectors
2 FORMAT CONV. OUTPUT (OPTION) A/B connectors
3 SD SDI OUTPUT 1/2/MONITOR connectors
4 DIGITAL OUTPUT (AES/EBU) AUDIO connectors
Note
This is only valid when the optional HKSR-5001 format
converter board is installed.
c SD SDI OUTPUT 1/2/MONITOR connectors
(BNC)
These output three sets of video/audio signals. When the
ALT/[F6] (CHARA SUPER) buttons are set to ON in the
TC menu, time data or other text data is superimposed on
the output from the MONITOR connector.
d DIGITAL OUTPUT (AES/EBU) AUDIO
connectors (BNC)
These output digital audio signals in AES/EBU format for
channels 1 to 12.
25
2-2 Connector Panel