Sony SRW-5100 Operation Manual page 126

Item number Item
742 CHROMA PHASE
(ALL)
(HD/UC/SD/DC)
preset: 0
743 BLACK LEVEL
(ALL)
(HD/UC/SD/DC)
preset: 100%
(4000H)
755 MASTER LEVEL
(D1)
preset: 100%
(4000H)
756 Y LEVEL (D1)
preset: 100%
(4000H)
757 B–Y LEVEL (D1)
preset: 100%
(4000H)
758 R–Y LEVEL (D1)
preset: 100%
(4000H)
762 SETUP LEVEL
(CST)
preset: 7.5 IRE
763 SYNC PHASE (SD)
preset: 0
764 FINE (SD)
preset: 0
775 VIDEO OUTPUT
DATA
777 DOWNCONVERTER
ACTIVE LINE
126
Menu List
Setting Function
–127 Adjusts the chroma phase (HUE) of HD, UC, SD, and DC
output.
[0]
127
–31.0% (0H) Adjusts the black level of HD, UC, SD, and DC output.
Note
The range of control possible from the HKDV-900/503 is
–8.0% to 8.0%.
31.0% (220H)
0.0% (0H) Adjusts the level of the D1 video signal output from SD SDI
OUTPUT. Simultaneously adjusts the Y, B–Y, and R–Y
level.
141.3% (5A70H)
0.0% (0H) Adjusts the level of the D1 video signal output from SD SDI
OUTPUT. Adjusts the Y level of the video signal.
141.3% (5A70H)
0.0% (0H) Adjusts the level of the D1 video signal output from SD SDI
OUTPUT. Adjusts the B–Y level of the video signal.
141.3% (5A70H)
0.0% (0H) Adjusts the level of the D1 video signal output from SD SDI
OUTPUT. Adjusts the R–Y level of the video signal.
141.3% (5A70H)
0.0 Adjusts the setup level of the analog composite video
signal output from SD OUTPUT COMPOSITE (MONITOR)
connector.
[7.5]
10.0
–128 Adjusts the sync phase of the D1 video signal output from
SD SDI OUTPUT and analog composite video signal
output from SD OUTPUT COMPOSITE (MONITOR)
[0]
connector.
127
[0]
Makes fine adjustments to the sync phase of the D1 video
signal output from SD SDI OUTPUT and analog composite
video signal output from SD OUTPUT COMPOSITE
1024
(MONITOR) connector.
8bit Sets the bit size of the output data from the HD-SD
[10bit] converter.
8bit: When connected to an 8-bit system
10bit: When connected to a 10-bit system
Note
Make sure the bit length matches the destination device.
486 line Sets the number of active lines in the down converter
[485 line] output (NTSC).
486 line: 486 lines (Line 20 of the second field is active.)
485 line: 485 lines (Line 20 of the second field is blank.)