Items Relating To Editing (Nos. 301 To; Items Relating To Editing (Nos. 301 To - Sony SRW-5100 Operation Manual

Item number Item
203 PARALLEL
RUNNING
204 VIDEO REMOTE
CONTROL SELECT
Sub item
1 IMAGE
ENHANCER
2 D2 SETUP
205 REMOTE
NETWORK
211 REMOTE 1 PORT

Items Relating to Editing (Nos. 301 to ...)

Item number Item
302 PREROLL TIME
303 POSTROLL TIME
118
Menu List
Setting Function
[disable] Selects whether two or more units can be operated
enable synchronized.
disable: Synchronized operation is not carried out.
enable: Synchronized operation is enabled.
Note
For synchronized operation to be possible, this item must
be set to "enable" on all of the connected units.
Make settings for control from HKDV-900/503 via the
VIDEO CONTROL (9P) connector.
U&D Select whether to control the up-converter or down-
UP converter whether controlling the image enhancer.
[DOWN] U&D: Control both the up-converter and down-converter.
UP: Control the up-converter.
DOWN: Control the down-converter.
BLACK Select the menu item to be controlled by the SETUP dial on
[SETUP]
the HKDV-900/503 with the D2 button pressed.
BLACK: Control menu item 743.
SETUP: Control menu item 762.
For details, see items 743 and 762.
Note
After changing the setting for this item, power off this unit or
HKDV-900/503 and power it on again.
on Specifies whether or not control from a network is possible.
[off]
on: Allows control from a network.
off: Does not allow remote control from a network.
Specifies whether to use one or both of the REMOTE 1-
I & I/O
IN(9P) and REMOTE 1-I/O(9P) connectors on the
IN
connector panel.
I/O
I & I/O: Use both the REMOTE 1-IN(9P) connector and the
IN: Use only the REMOTE 1-IN(9P) connector.
I/O: Use only the REMOTE 1- I/O(9P) connector.
Setting Function
0 sec This sets the preroll time. The range is from 0 to 30
seconds, in steps of 1 second. The preroll time should
generally be set to at least 3 seconds, and for phase
[5 sec]
adjustment with an editing controller it is recommended to
set the preroll time to at least 5 seconds.
30 sec
0 sec This sets the tape running time after passing the OUT point
(postroll time) in automatic repeat playback.
The range is from 0 to 30 seconds, in steps of 1 second.
[5 sec]
30 sec
REMOTE 1-I/O(9P) connector.