Sony SRW-5100 Operation Manual page 59

Symbol Meaning
UBR. VITC reader user bit data
DUR The duration between IN and OUT points
Note
When time data or user bits are not read correctly, a "*"
will be displayed in this block so that the symbols become
"T*R", "U*R", "T*R.", "U*R.", etc.
b Drop frame mark of the time code reader
" • ": drop frame mode
" : ": non-drop frame mode
c Drop frame mark of the time code generator
" • ": drop frame mode
" : ": non-drop frame mode
Display
A block B block
TAPE UNTHREAD
STANDBY OFF
T.RELEASE
STOP
PREROLL
PLAY
PLAY LOCK
PLY-SPD Speed shift from
normal speed (%)
JOG STILL
JOG FWD
JOG REV
SHUTTLE (speed)
VAR (speed)
DMC
(speed
D-PREV
(speed
DMC-SPD (speed)
a) Initial speed or memorized speed
To display a warning message
The first 16 characters of the
warning message
Cassette not inserted
Standby off mode
Tension release mode
Stop mode
Preroll mode
Playback mode (servo unlocked)
Playback mode (servo locked)
Capstan override mode
Still-picture jog mode
Forward jog (B is lit)
Reverse jog (b is lit)
Shuttle mode
Variable mode
a) DMC memorize mode
)
a) DMC edit preview mode
)
DMC initial speed setting
d Field mark of the VITC data
" ": (blank space) fields 1 and 3
" * ": fields 2 and 4
e Operation mode
The contents are divided into blocks A and B as shown
below.
Block A: Indicates the operation mode.
Block B: Indicates the tape speed or servo lock status.
Operation mode
Set the VTR SETUP menu item 626 "DISPLAY
INFORMATION select" to any setting other than "time
data only" and set the menu item 627 "CHAR WARNING
DISPLAY at dual line mode" to "on". The first 16
characters of the warning message flashes on the second
line.
For details about the warning messages, see "Warning
Messages" on page 105.
When there are multiple warning messages, each message
flashes twice before it is replaced by the next message.
When there is no warning message, the setting of the VTR
59
4-3 TC Menu