Double-Speed Playback - Sony SRW-5100 Operation Manual

Accurate and stable video signal output is made possible
by setting and adjusting the internal digital video
processor.
Playback modes
HDCAM-SR format
The following playback formats can be selected:
• For playback of a 4:2:2 signal
1080×1920: 23.98PsF/24PsF/25PsF/29.97PsF/30PsF, 50i/
59.94i/60i, 50P/59.94P/60P
720×1280: 50P/59.94P
Note
Playback of 1080×1920-pixel pictures in 50P, 59.94P, or
60P mode require the HKSR-5103 (option).
• For playback of a 4:4:4 signal
1080×1920 (SQ): 23.98PsF/24PsF/25PsF/29.97PsF/
30PsF, 50i/59.94i/60i
1)
1080×1920 (HQ ): 23.98PsF/24PsF/25PsF/29.97PsF/
30PsF, 50i/59.94i/60i
720×1280: 50P/59.94P
Note
Playback in 4:4:4 (SQ/HQ) mode requires the HKSR-5103
(option).
1) HQ mode
This mode enables higher quality playback than SQ mode (440 Mbps).
• Dual-stream playback
Two independent 4:2:2 signal lines can be played back as
a dual stream. Also, the recording of output from two
independent cameras on a single VTR can be played back
as a dual-stream, 3-D signal.
Applicable system settings:
4:2:2 signal
1080×1920: 23.98PsF/24PsF/25PsF/29.97PsF/30PsF, 50i/
59.94i/60i
Note
Dual-stream playback requires the HKSR-5103 (option).
Playback compatibility
You can select the following compatibility playback
functions.
• HDCAM
1080×1920: 59.94i/60i/50i/23.98PsF/24PsF/25PsF/
29.97PsF/30PsF
• Digital Betacam
525/59.94i, 625/50i
Note
Digital Betacam playback and HDCAM playback require
the HKSR-5802 (option).

Double-speed playback

Recordings made with any of the following applicable
system settings can be played back at double speed, and by
adding the playback signal to a dual link output signal, the
transmission time to a server, etc. can be shortened.
Applicable system settings:
4:2:2 signal
1080×1920: 23.98PsF/24PsF/25PsF/29.97PsF/30PsF, 50i/
59.94i/60i
720×1280: 50P/59.94P
Notes
• Double-speed playback requires the HKSR-5103
(option).
• Only a limited number of devices can support signals
processed for double-speed playback.
For details, refer to the operation manual supplied with
the device to be used for double-speed playback.
Internal format conversion function
By installing an optional HKSR-5001, when the operation
mode of this unit is 23.98PsF or 24PsF, a 59.94i or 60i
mode HD SDI output (audio/VITC multiplex) is made
available. Additionally, conversion in either direction
between 1080×1920 and 720×1280, and conversion from
4:2:2 signal to 4:4:4 signal is possible, and with the
additional installation of an HKSR-5103, conversion from
a 4:4:4 signal to a 4:2:2 signal is also possible.
Noiseless playback with non-tracking head (for
HDCAM-SR format only)
In addition to a playback head, a non-tracking head is
provided. Noiseless playback within the range of –0.5 to
+1.0 times normal playback speed is thus possible.
Noiseless playback with DT heads (for Digital
Betacam or HDCAM format only)
When using the HDCAM format, the dedicated playback
DT heads allow you to perform noiseless playback in the
range from –1 to +2 times normal speed, including still-
picture playback. When using the Digital Betacam format,
the playback range is from –1 to +3.
Note
Digital Betacam playback and HDCAM playback require
the HKSR-5802 (option).
Internal time code reader
Time codes (LTC or user bits) can be read during playback
using the time code reader.
Computer servo system
Computer-controlled servo motors provide direct drive for
the drum, capstan, and two reels, enabling quick and
accurate tape access.
11
1-1 Features