Sony SRW-5100 Operation Manual page 52

Section to insert time code
Tape
3 frames 20 frames (STOP
1
Press the HOME button.
The HOME menu screen appears.
2
Press the ALT/[F8] (STOP CODE) buttons.
The stop code menu screen appears.
3
Press the [F8] (CODE ERASE) button to select "on".
Pressing the button toggles between "on" and "off".
4
Press the [F9] (EXEC) button.
To abandon the operation at any point
Press the STOP button.
To check the erasure
Press the PREROLL button while holding down the SFT
button. This unit prerolls 5 seconds before the recording
point, and starts playback. If the unit stops at the point at
which the stop code was recorded, repeat the erasure.
Note
Checking the erasure by pressing the PREROLL button
while holding down the SFT button is only valid in the stop
code menu screen.
52
4-2 HOME Menu
3 frames
CODE before erasure)