Sony SRW-5100 Operation Manual page 37

Storing the current VTR menu settings to a
VTR memory bank
1
Press the SET UP button.
The SET UP menu appears in the display.
2
Press the [F1] (VTR BANK) button.
The VTR BANK menu appears in the display.
3
Press the [F8] (DIRECTION) button to select the ,
direction.
4
Press the cursor T button to move the cursor (B) to
CURRENT SETUP[C], then press the [F6] (EDIT
TITLE) button to add a title to the current menu
settings of this unit.
For details, see "4-1-6 Adding Titles to the Data" on
page 43.
5
Press the cursor t button to move the cursor (B) to
SETUP BANK, then press the cursor R or r button to
move the flashing cursor bar to the number of the VTR
memory bank to be used for saving the current menu
settings.
The flashing cursor bar indicates the storage
destination.
6
Press the [F9] (COPY) button.
CLR button
7
8
A message appears in the display asking you to
confirm the operation.
To cancel the storage operation
Press the CLR button.
Press the [F9] (COPY) button while holding down the
SFT button.
The current menu settings are stored to the VTR
memory bank.
To add or change a title for VTR menu settings
after storing them to the VTR memory bank
Move the cursor (B) to the number of the VTR
memory bank where the settings are stored, then press
the [F6] (EDIT TITLE) button.
For more information, see "4-1-6 Adding Titles to the
Data" on page 43.
Recovering previous settings after new settings
have been saved
Press the [F2] (UNDO) button to recover the previous
settings.
Preventing accidental erasure after saving settings
Move the cursor to the memory bank to be protected
and press ALT/[F2] (PROTECT) buttons. A will
appear next to the selected bank.
Press the [F10] (EXIT) button.
The SET UP menu appears again.
4-1 Registering and Storing Menu Settings
37