Coffee Brewing - Bunn AutoPOD Technical Training Manual

Step 4: After entering the ounces collected, the machine changed the default time to the actual calibrated dispense
time to deliver 10 ounces of water. The display will revert back to the original menu, CALIBRATE MAXIMUM H2O
TIME?, to repeat test if needed.
Coffee Brewing Process
Step 1: Home screen will display a total of three messages.
AutoPod Brewer
Ready To Brew
Step 2: Place cup under brew chamber onto booster tray or drip tray. The booster tray will allow up to 5 inch cup
clearance or bottom drip tray up to 8 inch cup clearance.
Step 3: Press the Open/Close switch to open the pod door and press a coffee pod firmly down into the pod holder.
Menu screens will prompt you through the process. The pod holder will accommodate a variety of pods and different
sizes from 50 to 61mm diameter.
PLEASE WAIT
DOOR OPENING
Step 4: Press the Open/Door switch to close the pod door. Menu screens will prompt you through closing the door
and selecting brew size.
PLEASE WAIT
DOOR CLOSING
Step 5: After selecting brew, the menu screens will scroll brewing messages during the brew process and inform you
when brewing is complete. The system will automatically dispense the pod into the pod bin, reset back to standby
position and be ready for next brew command.
PLEASE WAIT
PRE-INFUSION
Place Cup
To Begin
PRESS POD
IN DRAWER
SELECT BREW
BREWING
PLEASE WAIT
Press Open
To Load Pod
BREWING
COMPLETE YOUR BEVERAGE
ENJOY
Bunn-O-Matic Corporation
11