Important: Changes And Precautions After Switching The Ink; Change: When To Perform Manual Cleaning - Roland ECO-SOL MAX3 Instruction Manual

Important: Changes and Precautions after Switching the Ink

Change: When to Perform Manual Cleaning

When using MAX 3 ink, you have to perform manual cleaning at different times than with the conventional ink.
* This manual cleaning is explained in "Manual Cleaning" in the user's manual of the printer that you are using.
Cleaning timing
Before the start of daily
operations
When dot drop-outs are
not fixed by performing
normal cleaning multiple
times
• Once per month
• When symptoms cannot
be improved with medi-
um or powerful cleaning
After switching to MAX 3 ink
Cleaning timing
Before the start of daily
operations
If the message "TIME
FOR MAINTENANCE" is
displayed
(approximately once
per week)
When dot drop-outs are
not fixed by performing
normal cleaning multiple
times
When symptoms cannot
be improved with medi-
um or powerful cleaning
Before switching to MAX 3 ink
Cleaning method
Normal cleaning
Medium cleaning
Powerful cleaning
Manual cleaning
Cleaning method
Normal cleaning
Manual cleaning
Medium cleaning
Powerful cleaning
Manual cleaning
Remarks
Carry out a printing test. If dot drop-out occurs,
perform cleaning.
• If dot drop-outs are not fixed by performing
medium cleaning, perform powerful cleaning.
• This consumes more ink than normal
cleaning, and too-frequent use may damage
the print heads themselves. Avoid using it
more than necessary.
• We recommend that you perform this
cleaning periodically.
• Replacing the wipers and felt wipers is also an
effective means of improving the symptoms.
Remarks
Carry out a printing test. If dot drop-out occurs,
perform cleaning.
Refer to "Change: Cleaning Locations
During Manual Cleaning"
next page for details on the cleaning
locations.
* "TIME FOR MAINTENANCE" is displayed
approximately once per week, but it may be
displayed more frequently depending on
the usage conditions. When this message is
displayed, be sure to perform manual cleaning.
• If dot drop-outs are not fixed by performing
medium cleaning, perform powerful cleaning.
• This consumes more ink than normal
cleaning, and too-frequent use may damage
the print heads themselves. Avoid using it
more than necessary.
Refer to "Change: Cleaning Locations During
Manual Cleaning" on the next page for details
on the cleaning locations.
Replacing the wipers and felt wipers is also an
effective means of improving the symptoms.
ECO-SOL MAX 3 Ink Switching Method
on the
17