Delay On Timer; Delay Off Timer; Cancelling Timers; Sleep Mode - Rinnai RINV25RB Operation Manual

DELAY ON TIMER

1� With the appliance "OFF", press the "TIMER" button once, both "TIMER" and
a blinking "ON" are shown on the LCD screen.
2� Press or to set the desired time period (the available time range in 1/2
hour increments from 0�5 to 9�5 and the hour increments to 24 are available)�
3� Press the "TIMER" button again to lock in the setting, both "TIMER" and a
"ON" are shown on the LCD screen.
When setting a timer function, at each step failure to press buttons
within 10 seconds will terminated the timer setup. If this happens
you will need to re-start the timer setup procedure at step 1.
NOTE
4� Set the mode, temperature and fan setting you wish the appliance to operate
with when the "ON" time period is reached.

DELAY OFF TIMER

1� With the appliance "ON", press the "TIMER" button once, both "TIMER" and
a blinking "OFF" are shown on the LCD screen.
2� Press or to set the desired time period (the available time range in 1/2
hour increments from 0�5 to 9�5 and the hour increments to 24 are available)�
3� Press the "TIMER" button again to lock in the setting, both "TIMER" and a
"OFF" are shown on the LCD screen.
When setting a timer function, at each step failure to press buttons
within 10 seconds will terminated the timer setup. If this happens
you will need to re-start the timer setup procedure at step 1.
NOTE
4� Set the mode, temperature and fan setting you wish the appliance to operate
with until the "OFF" time period is reached.

CANCELLING TIMERS

1� When a timer is set, pressing the "TIMER" button will cancel any timer settings
and the timer "OFF" or "ON" indicator will no longer be shown on the LCD
screen�

SLEEP MODE

1� Press to turn on the power.
2� Set the desired mode, temperature and fan setting as per basic operations.
3� Press the "SLEEP" button once, "SLEEP" is shown on the LCD screen:
For Cooling: In cooling operation the "SLEEP" mode allows the set temperature to
increase 1°C after 1 hour and another 1°C after an additional hour� This maintains
your comfort while saving energy.
For Heating: In heating operation the "SLEEP" mode allows the set temperature to
decrease 2°C after 1 hour and another 2°C after an additional hour� This maintains
your comfort while saving energy.
Use the Delay Off Timer to turn off the air conditioner automatically
in conjunction with SLEEP mode.
NOTE
4� Pressing the "SLEEP" button again will cancel sleep mode, "SLEEP" will no
longer be shown on the LCD screen.
Rinnai 11
ADVANCED OPERATION
AUTO COOL DRY HEAT FAN
SPEED TURBO HIGH MID LOW AUTO
TIMER C SET
F
ON OFF
h ROOM
ON OFF
SWING SWING
SLEEP iClean HEALTH iFavor
Anti - FUNGAS DISPLAY LOCK
AUTO COOL DRY HEAT FAN
SPEED TURBO HIGH MID LOW AUTO
TIMER C SET
F
ON OFF
h ROOM
OFF
ON
SWING SWING
SLEEP iClean HEALTH iFavor
Anti - FUNGAS DISPLAY LOCK
AUTO COOL DRY HEAT FAN
SPEED TURBO HIGH MID LOW AUTO
TIMER C SET
F
ON OFF
h ROOM
OFF
ON
SWING SWING
SLEEP iClean HEALTH iFavor
Anti - FUNGAS DISPLAY LOCK
AUTO COOL DRY HEAT FAN
SPEED TURBO HIGH MID LOW AUTO
C
TIMER SET
F
ON OFF
h ROOM
ON OFF
SWING SWING
SLEEP iClean HEALTH iFavor
Anti - FUNGAS DISPLAY LOCK
AUTO COOL DRY HEAT FAN
SPEED TURBO HIGH MID LOW AUTO
C
TIMER SET
F
ON OFF
h ROOM
ON OFF
SWING SWING
SLEEP iClean HEALTH iFavor
Anti - FUNGAS DISPLAY LOCK
AUTO COOL DRY HEAT FAN
SPEED TURBO HIGH MID LOW AUTO
C
TIMER SET
F
ON OFF
h ROOM
ON OFF
SWING SWING
SLEEP iClean HEALTH iFavor
Anti - FUNGAS DISPLAY LOCK
Split AC OM