Manual Operation Mode; Fan Only Operation Mode; Using The Timer; Setting The Cooler To Turn Itself On - Rinnai I10 Operation Manual

•
The outlet airflow noise is kept to a minimum, as the fan speed is only as fast as required to maintain the set
comfort level. This slower speed also results in more efficient saturation of the Cooler filter pads, and a cooler
outlet air temperature�

MANUAL Operation Mode

Manual operation enables you to control the fan, its speed, the pump is always on�
Begin by pressing the ON/OFF button (2) to turn the Cooler on. If "MANUAL" is displayed, the system is set for
manual operation, otherwise:
1� Press the MODE button (3) to cycle through the Cooler's operating modes, until "MANUAL" is displayed in
the Digital Display (7)�
2� Press the UP (5) and DOWN (6) buttons to select the fan speed level you require� The longer the column
shown in the Digital Display (7) the faster the fan speed, the shorter the column, the slower the fan speed�

FAN ONLY Operation Mode

Fan only operation allows you to manually operate fan speed only�
1� Begin by pressing the ON/OFF button (2) to turn the Cooler on�
2� Press the MODE button (3) to cycle through the Cooler's operating modes, until "FAN ONLY" is displayed in
the Digital Display (7)�
3� Press the UP (5) and DOWN (6) buttons to select the fan speed level you require� The longer the column
shown in the Digital Display (7) the faster the fan speed, the shorter the column, the slower the fan speed�

USING THE TIMER

When the Cooler is operating, you can pre-set a time for the Timer to turn the Cooler OFF� Also, when the Cooler
is turned OFF, you can select a time for the Timer to turn it ON automatically� So if you are out for the day you can
set the Cooler to come on and cool the house before you return� The timer is set in 1-hour increments, ranging
from 1 to 17 hours�
If the pump is going to be used, adequate ventilation (openings) need to be provided to prevent
condensation build up.
CAUTION

SETTING THE COOLER TO TURN ITSELF ON

The system must be in the OFF state. Press the ON/OFF button (2) until the Blue Power Indicator
LED (1) is off and OFF is displayed on the Digital Display (7).
NOTE
1� Push TIMER button (4) to enter timer setting mode�
2� Press the UP (5) and DOWN (6) buttons to set the desired ON time (e�g� 4 hours)�
3� Press the TIMER button (4) to save timer setting�
4� The controller will return to the OFF screen, and the time remaining until the ON timer activates will be
displayed (e�g� ON IN 4:00)�

SETTING THE COOLER TO TURN ITSELF OFF

The system must be running in the desired operating mode, i.e. "AUTO COOL", "MANUAL", or
"FAN ONLY".
NOTE
1� Push TIMER button (4) to enter timer setting mode�
2� Press the UP (5) and DOWN (6) buttons to set the desired OFF time (e�g� 4 hours)�
3� Press the TIMER button (4) to save timer setting�
4� The controller will return to the current operational screen, and the time remaining until the OFF timer activates
will be displayed (e�g� OFF IN 4:00)�
Rinnai
WALL CONTROL OPERATION
7 I Series Evap AC OM