Auto Operation; Room Temperature Display - Rinnai RINV25RB Operation Manual

AUTO OPERATION

In this mode, the fan speed, heating / cooling and the temperature are all adjusted
automatically by the appliance, based on the current room temperature.
1� Press to turn on the power.
2� Press the "MODE" button until "AUTO" is shown on the LCD screen.
3� To cancel the "AUTO" mode an return the appliance to manual control select
another mode�
The table below describes the relationship between room temperature and the modes of operation when the
appliance when set to Auto Operation mode.
Room Temperature
≥ 27°C
20°C ~ 27°C
≤ 20°C
In this mode, you cannot adjust the temperature, however the SWING operations for air direction
can still be selected.
NOTE

ROOM TEMPERATURE DISPLAY

The remote control is cable of displaying either the set temperature or the current
ambient room temperature�
1� To display the current room temperature, press the "ROOM °C" button once.
"ROOM" is shown on the LCD screen and the temperature digits display the
current room temperature�
2� To display the current set temperature, press the "ROOM °C" button again.
"SET" is shown on the LCD screen and the temperature digits display the
current set temperature�
The "SET" temperature display is the default display for the remote control and will be reset when
the controller is turned off and on.
NOTE
Rinnai
Set Temperature
24°C
24°C
24°C
9
BASIC OPERATION
AUTO COOL DRY HEAT FAN
SPEED TURBO HIGH MID LOW AUTO
TIMER C SET
F
ON OFF
h ROOM
OFF
ON
SWING SWING
SLEEP iClean HEALTH iFavor
Anti - FUNGAS DISPLAY LOCK
Operation Mode
Cooling Mode
Dry Mode
Heating Mode
AUTO COOL DRY HEAT FAN
SPEED TURBO HIGH MID LOW AUTO
TIMER C SET
F
ON OFF
h ROOM
OFF
ON
SWING SWING
SLEEP iClean HEALTH iFavor
Anti - FUNGAS DISPLAY LOCK
Split AC OM