Fitting The Scanner Wires - Kyocera TASKalfa 250ci Service Manual

2JZ/2JX/2JV/2H7
4. Remove the round terminals from the scan-
ner wire springs on scanner unit left side.
5. Remove the scanner wire.

Fitting the scanner wires

6. Move the mirror 2 frame as shown in the fig-
ure and insert two frame securing tools into
the positioning holes at the front and rear of
the machine center to fix the mirror 2 frame
in position.
1-5-16
Scanner wire
spring
Frame securing tool
Mirror 2 frame
Round terminal
Round terminal
Scanner wire
spring
Figure 1-5-27
Frame securing tool
Figure 1-5-28