Tips:
1.
If your Internet connection type is
2.
If you use
Dynamic IP
and
>
Network
>
Internet
to complete the configuration.
3.
If you still cannot connect to the Internet, refer to
4. 3
Setting Up an IPv6 Internet Connection
Your ISP provides information about one of the following Internet connection types: PPPoE, Dynamic IP(SLAAC/DHCPv6),
Static IP, 6to4 tunnel, Pass-Through (Bridge).
1.
Visit http://tplinkwifi.net, then log in with the password you set for the router.
2.
Go to
Advanced
>
IPv6
3.
Select the Internet connection type provided by ISP.
Chapter 4 .
Set Up Internet Connection
Bigpond
Cable, please go to
PPPoE
and you are provided any other parameters that are not required on the page, please go to
FAQ
to log into the configuration page.
Advanced
>
Network
for further instructions.
> Internet.
Advanced
16