System Log - TP-Link Archer C2600 User Manual

2 ) Enter Web Management Port
3 ) Click Save.
Devices on the Internet can log in to
manage the router.
Tips:
1. You can find the WAN IP address of the router on
2. The router's WAN IP is usually a dynamic IP. Please refer to
through a domain name.
Allow specific devices to manage the router remotely:
1 ) Select Enable Remote Management for Specified
2 ) Enter Web Management Port
3 ) In Remote Management IP
4 ) Click Save.
Devices using this WAN IP can manage the router by logging in to
http://113.116.60.229:1024).
Tips:
The router's WAN IP is usually a dynamic IP. Please refer to
a domain name.
12. 9

System Log

When the router does not work properly, you can save the system log and send it to the technical support for troubleshooting.
• To Save the System Log in Local:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > System Tools
3. Choose the type and level of the system log to your need.
Chapter 12 . Manage the Router
(1024-65535 or 80).
http://Router's WAN IP address:port number
Basic > Network Maps
Set up a Dynamic DNS Service Account
Devices.
(1024-65535 or 80).
address, enter the IP address of the remote device to manage the router.
Set Up a Dynamic DNS Service Account
> System Log.
(such as http://113.116.60.229:1024) to
> Internet.
if you want to log in to the router
http://Router's WAN IP:port number
if you want to log in to the router through
(such as
68