Chapter 14. Faq - TP-Link Archer C2600 User Manual

FAQ
Q1. What can I do if I forgot my wireless password?
The default password is labeled at the back of the router. If the password has been altered, please connect the router to the
computer using a cable and follow the steps below:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced >Basic
future use.
Q2. How to retrieve the username and password of the web management page?
The default username and password of the web management page are
altered, please follow the steps below:
If you have altered the login username and password, and Password Recovery is enabled:
Note: Ensure the Internet access is available before using this method.
1. Visit http://tplinkwifi.net;
2. Click Forget password
Recovery;
3. Login to your mailbox to copy the verification code;
4. Paste the verification code on the window which pops up in Step 2;
5. Click Confirm (the login username and password will be reset as
6. Enter admin (in lower case) as both username and password to login.
Tips: Please refer to Password Recovery
If you have altered the username and password but Password Recovery is disabled:
1. Reset the router to factory default settings: Press and hold the Reset button for at least 10 seconds and then release;
2. Visit http://tplinkwifi.net;
3. Enter admin (in lower case) as both username and password to login.
Note: You'll need to reconfigure the router to surf the Internet once the router is reset, and please mark down your new password for
future use.
Q3. I cannot login to the router's web management page, what can I do?
This can happen for a variety of reasons, please try the methods below and try again.
1. Make sure the router connects to the computer correctly and the corresponding LED indicator(s) light up.
2. Make sure the IP address of your computer is configured as
address automatically.
3. Make sure the http://tplinkwifi.net
4. Check your computer's settings:
1 ) Go to Start > Control Panel
2 ) Click Internet Options
3 ) Click Connections, select
FAQ
> Wireless, locate the password on the loading page, and mark down your new password for
> Send Code, the verification code will be sent to the mailbox you set when enabling Password
to learn how to configure Password Recovery.
you input is right.
> Network and
on the bottom left;
Never dial a connection;
admin
admin after the click);
Obtain an IP address automatically
Internet, and click View network status and
(in lower case). If the password has been
and Obtain DNS server
tasks;
73