TP-Link Archer C2600 User Manual page 83

On Windows 7
1 ) If you see the message
somehow;
2 ) Clicking on Troubleshoot
On Windows XP
1 ) If you see the message
configuration utility is disabled or you are running another wireless configuration tool to connect the wireless;
2 ) Exit the wireless configuration tool( the TP-LINK Utility, for example);
3 ) Select and right click on
4 ) Expand Services and Applications
right side;
5 ) Right click Wireless Zero
6 ) Change Startup type
OK.
7 ) Connect to wireless network.
If you can find other wireless network except your own, please follow the steps below:
1. Check the WLAN LED indicator on your wireless router/modem;
2. Make sure your computer/device is still in the range of your router/modem, move closer if it is currently too far away;
3. Go to Advanced >
Network Name, make sure the Region is selected correctly and wireless is not hided;
Note:
Different countries have different laws about wireless channel. For example, USA allows 2.4GHz channel from 1 to 11, while UK allows from
1 to 13.If you select the Region as UK or the Channel as 12/13 while you are in USA, your computer might not be able to pick up the signal.
4. Connect to wireless network.
FAQ
No connections are
and windows might be able to fix the problem by itself.
Windows cannot configure this wireless
My Computer on desktop, select
> Services, find and locate
Configuration, and then select Properties;
to Automatic, click on Start button and make sure the Service status is Started. And then click
Wireless > Wireless Settings, and check the wireless router settings, double check your Wireless
available, it is usually because the wireless function is disabled or blocked
Manage to open Computer Management window;
Wireless Zero Configuration
connection, this is usually because windows
in the Services list on the
80