Use The Wps Wizard For Wi-Fi Connections - TP-Link Archer C2600 User Manual

Note:
1. If you want to enable/disable the WPS feature, go to
box.
2. PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported devices can
connect to your router with the PIN. The default PIN is labeled on the bottom of the router.
11. 7. 2.

Use the WPS Wizard for Wi-Fi connections

1. Select a setup method:
• Push Button(Recommended): Click the
device.
• PIN: Enter the client's PIN, and click Connect.
2. Success will appear on the above screen and the WPS LED on the router will keep on for five minutes if the client has
been successfully added to the network.
Chapter 11 . Customize your network settings
System Tools > System Parameters
Connect button on the screen. Within two minutes, push the WPS button on the client
> WPS, select or clear the Enable WPS check
60