TP-Link Archer C2600 User Manual page 82

3 ) Modify the LAN IP address as the follow picture shows. Here we take 192.168.2.1 as an example;
4 ) Click Save.
4. Power cycle the modem and the TP-LINK router.
1 ) Power off your modem and TP-LINK router, leave them off for 1 minute;
2 ) Power on your modem first, wait about 2 minutes until it get a solid cable or Internet light;
3 ) Power back TP-LINK router;
4 ) Wait another 1 or 2 minutes and check the Internet access.
5. Double check the Internet Connection Type.
1 ) Confirm your Internet Connection Type, which can be learned from the ISP;
2 ) Visit http://tplinkwifi.net, and log in with the username and password you set for the router;
3 ) Go to Advanced
4 ) Select your Internet Connection Type
5 ) Click Save.
6 ) Power cycle the modem and the TP-LINK router again.
3. Please refer to Upgrade the Firmware
4. Check the TCP/IP settings on the particular device if all other devices can get Internet from the router.
If you've tried every method above but cannot access the Internet, please contact the technical support.
Q6. I cannot find my wireless network or I cannot connect the wireless network, what can I do?
If you fail to find any wireless network, please follow the steps below:
1. Make sure the wireless function is enabled if you're using a laptop with built-in wireless adapter. You can refer to the
relevant document or contact the laptop manufacturer.
2. Make sure the wireless adapter driver is installed successfully and the wireless adapter is enabled.
FAQ
> Network >Internet;
and fill in other parameters with the help of page tips;
to upgrade the firmware of the router.
79