Customize your network
settings
This chapter guides you on how to configure advanced networking features
that are available for this router.
This chapter contains the following sections:
•
Change the LAN Settings
•
Configure to support IPTV service
•
Specify DHCP Server Settings
•
Set Up a Dynamic DNS Service Account
•
Create Static Routes
•
Specify Wireless Settings
•
Use WPS for wireless connection
11. 1
Change the LAN Settings
The router is preset with a default LAN IP 192.168.0.1, which you can use to log in to its web-based management page. The
LAN IP address together with the Subnet Mask also defines the subnet that the connected devices are on. If the IP address
conflicts with another device on your local network or your network requires a specific IP subnet, you can change it.
1.
Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2.
Go to
Advanced
>
Network
3.
Type in a new IP Address appropriate to your needs.
4.
Leave the
Subnet Mask
5.
Click Save.
Note:
If you have set the Virtual Server, DMZ or DHCP address reservation, and the new LAN IP address is not in the same subnet with the old one,
then you should reconfigure them.
11. 2
Configure to support IPTV service
I want to:
How can I
do that?
Chapter 11 .
Customize your network settings
>
LAN
page.
as the default settings.
Configure IPTV setup to enable Internet /IPTV /Phone service provided by my Internet Service
Provider (ISP).
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
Advanced
>
Network
3. If your ISP provide the networking service based on IGMP technology, e.g., British
Telecom(BT) and Talk Talk in UK:
1 ) Select the
IGMP Proxy
information provided by your ISP.
>
IPTV
to open the configuration page.
checkbox and select the
IGMP
Version, either V2 or V3, according to
11
51