Access Control - TP-Link Archer C2600 User Manual

The level of protection is based on the traffic packets number. The protection will be triggered immediately when the
number of packets exceeds the preset threshold value (the value can be set on
Parameters > DoS Protection Level
5. Select Ignore Ping Packet From WAN Port
6. Select Forbid Ping Packet From LAN Port
7. Click Save to make the settings effective.
9. 2

Access Control

Access Control is used to block or allow specific client devices to access your network (via wired or wireless) based on a list of
blocked devices (Blacklist) or a list of allowed devices (Whitelist).
I want to:
How can I
do that?
Chapter 9 . Network Security
Settings), and the vicious host will be displayed in the
if you want to ignore the ping packets from WAN port.
if you want to ignore the ping packets from LAN port.
Block or allow specific client devices to access my network (via wired or wireless).
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > Security > Access Control.
3. Enable Access Control.
4. Select the access mode to either block (recommended) or allow the device(s) in the list.
To block specific device(s)
1 ) Select Blacklist and click Save.
Advanced > System Tools
Blocked DoS Host
> System
List.
44