Backup And Restore Configuration Settings - TP-Link Archer C2600 User Manual

Note:
1. Make sure the latest firmware file is matched with the hardware version (as shown in the webpage).
2. Make sure that you have a stable connection between the router and your computer. It is NOT recommended to upgrade the firmware
wirelessly.
3. Make sure you remove any USB storage device connected to the router before the firmware upgrade to prevent data loss.
4. Backup your router configuration.
5. Do NOT turn off the router during the firmware upgrade.
Follow the steps to upgrade the firmware.
1. Download the latest firmware file for the router from our website www.tp-link.com.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
3. Go to Advanced > System Tools
4. Click Browse to locate the downloaded new firmware file, and click Upgrade.
5. Wait a few moments for the upgrading and rebooting.
12. 4

Backup and Restore Configuration Settings

The configuration settings are stored as a configuration file in the router. You can backup the configuration file to your
computer for future use and restore the router to a previous settings from the backup file when needed. Moreover, if necessary
you can erase the current settings and reset the router to the default factory settings.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > System Tools
To backup configuration settings:
Click Backup to save a copy of the current settings to your local computer. A '.bin' file of the current settings will be stored to
your computer.
To restore configuration settings:
1. Click Browse to locate the backup configuration file stored on your computer, and click Restore.
Chapter 12 . Manage the Router
> Firmware Upgrade.
> Backup & Restore.
64