Table of Contents
Advertisement
Chapter 4
4 4
Set Up the Router as an Access Point
The router can work as an access point, transforming your existing wired network to a
wireless one.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
SAVE. The router will reboot and switch to Access Point mode.
3. After rebooting, connect the router to your existing wired router via an Ethernet cable.
4. Log in again to the web management page http://tplinkwifi.net, and go to
>
Quick
Setup.
5. Configure your wireless settings and click Next.
6. Confirm the information and click SAVE. Now, you can enjoy Wi-Fi.
Tips:
• Functions, such as Parental Controls, QoS, NAT Forwarding, and game acceleration features are not supported in the
Access Point mode.
• Functions, such as Guest Network, are the same as those in the Router mode.
4 5
Set Up an IPv6 Internet Connection
Your ISP provides information about one of the following IPv6 internet connection types:
PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel, Pass-Through (Bridge).
System
>
Operation
Set Up Internet Connection
Mode, select
Access Point Mode
and click
Advanced
17
Advertisement
Table of Contents
