To change the security option:
1.
Select the wireless network
2.
Select an option from the
- Personal (Recommended), WPA/WPA2 - Enterprise and WEP. We recommend you don't change the default settings
unless necessary. If you select other options, configure the related parameters according to the help page.
In addition
•
Mode
- Select a transmission mode according to your wireless client devices.
802.11n only
for 2.4GHz; and
leave it as default.
•
Channel Width
- Select a channel width (bandwidth) for the wireless network.
•
Channel
- Select an operating channel for the wireless network. It is recommended to leave the channel to Auto, if you are
not experiencing the intermittent wireless connection issue.
•
Transmit Power
- Select either High,
setting is High.
11. 7
Use WPS for wireless connection
Wi-Fi Protected Setup(WPS) gives consumers an easier approach to set up a security-protected Wi-Fi connection.
1.
Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2.
Go to
Advanced
>
Wireless
11. 7. 1.
Set the router's PIN
Router's PIN is enabled by default to allow wireless devices to connect to the router using the PIN. You can use the default
one or generate a new one.
Chapter 11 .
Customize your network settings
2.4GHz
or 5GHz.
Security
dropdown list. The router provides four security options, No Security, WPA/WPA2
802.11a/n/ac
mixed,
802.11n/ac mixed
Middle
or
Low
to specify the data transmit power. The default and recommended
>
WPS
.
802.11b/g/n
or
802.11ac only
for 5GHz. It is recommended to just
mixed,
802.11g/n mixed
or
59