Calling Line Identification (Cli); Activating/Deactivating Speaker Mode - Gigaset C330 Owner's Manual

Making calls
Calling Line Identification
(CLI)
Calling Line Identification is a telephony
service that transmits caller identification
information (number and name). When you
receive a call, the caller's number and/or
name is displayed on the screen according
to the following rules:
Number/name is transmitted and
stored in the directory
Ð
The caller's
number and the
name according
to the directory
entry are dis-
played.
Accept
Number/name is transmitted but not
stored in the directory
If the number is transmitted it is displayed. If
the name is transmitted, it replaces the
number.
If the name exceeds 16 characters, only the
first 16 characters are displayed. If the
number exceeds 24 digits, only the first 24
digits are displayed.
Number/name is not transmitted
Calling is displayed.
Speaker mode
In speaker mode, instead of holding the
handset to your ear you can put it down, for
example on the table in front of you. This
allows other people to participate in the call.
32
U
Ø « Ú
Peter Smith
01234567890
Silence
Activating/deactivating speaker
mode
Activating while dialling
~ d
Enter the number and press the
speaker key.
¤
You should inform your caller before you
use the speaker function so that they
know someone else is listening.
Switching between earpiece and
speaker mode
d
Press the speaker key.
During a call or when listening to the
answering machine (Gigaset C330 A only),
activate or deactivate speaker mode.
If you wish to place the handset in the base/
charging cradle during a call:
¤
Press and hold the speaker key d while
placing the handset in the base.
Adjusting the earpiece/
speaker volume during a call
To adjust the earpiece or speaker volume
during a call:
q
Use the control key to adjust the
volume (five levels).
Switching to mute
You can deactivate the microphone in your
handset during an external call.
h
Press the mute key to mute the
handset.
Or:
§Mute§
Press the display key.
The display shows Mute On.
Press the key again to reactivate
the microphone.
Please note
If the telephone is muted, no keys except
the mute key h and the end call key a
will work.