Ending A Call; Accepting A Call - Gigaset C330 Owner's Manual

Making calls
If the back light is deactivated
it is switched on by pressing any key. In this
case the pressed key has no other function.
Making an external call
External calls are calls using the public tele-
phone network.
~ d
Enter the number and press the
talk key.
Or:
d ~ Press the talk key d and then
enter the number.
The number is limited to 24 digits.
You can cancel the dialling operation with
the end call key a.
An ongoing call is indi-
cated by:
You are shown the duration of the call while
the call is in progress.
If the line is in use by the base or another
handset, Line In Use is displayed.
Quick dialling
You can assign a number from the directory
to each of the digit keys
When the handset is in idle status:
¤
Or:
¤

Ending a call

a
The end of the call is indi-
cated by:
æ ç

Accepting a call

The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the ashing talk key c.
You can accept the call by:
¤
Or:
¤
If the handset is in the charging cradle and
the Auto Answer function is activated
the handset automatically answers the call
when you remove it from the charging cradle.
To deactivate the ringtone, press the
display key. You can accept the call as long as
it is displayed on the screen.
Press and hold the digit key.
The number is dialled immediately.
Brie y press the digit key:
Press the display key with number/name
(abbreviated if necessary) to dial the
number.
Press the end call key.
Pressing the talk key c.
Pressing the §Accept§ display key.
Making calls
to ,
æ ç
§Silence§
31