Making Internal Calls; Speaker Mode; Switching To Mute; Transferring A Call - Gigaset C330 Owner's Manual

Making internal calls

Speaker mode

Instead of putting the receiver to your ear
you can make a call using the speaker. This
allows other people to participate in the call.
Activating/deactivating speaker
mode
Activating while dialling
~ ø Enter the number and press the
speaker key.
When the speaker mode is activated, the
ø key lights up.
¤
You should inform your caller before you
use the speaker function so that they
know someone else is listening.
Switching between earpiece and
speaker mode
ø Press the speaker key.
During a call and when listening to the
answering machine (Gigaset C330 A only),
activate or deactivate speaker mode.
If you wish to place the receiver in the base
during a call:
¤
Press and hold the speaker key ø while
placing the receiver in the base.
For instructions on how to adjust the loud-
speaker volume,
Adjusting the earpiece/
speaker volume during a call
To adjust the earpiece or speaker volume
during a call:
r Use the control key to adjust the
volume in ve levels.
18

Switching to mute

You can deactivate the microphone in the
receiver of the base during an external call.
j Press the key to mute the micro-
phone. The display shows the
mute symbol
again to reactivate the micro-
phone.
Making internal calls
Internal calls between the base and the
handset or to other handsets registered on
the same base are free.
An internal call is indicated by the paging
tone, which is di erent from the incoming
tone.
Calling all handsets
k Initiate the internal call.
P Lift the receiver or press the
speaker key ø.
All handsets are called. The connection will
be established with the rst answering
handset. All other handsets cannot partici-
pate.
Ending a call
Q Replace the receiver or press the
speaker key ø.

Transferring a call

You can transfer an external call to any hand-
set.
During an external call:
k Press the key to page all regis-
tered handsets.
The external participant is put
on hold.
Either:
ø Press the key or replace the
receiver to transfer the call to
the rst answering handset.
. Press the key
h