Base Settings; Setting The Earpiece And Speaker Volume; Setting The Ringer; Setting The Ringer Volume - Gigaset C330 Owner's Manual

Base settings

Your telephone is precon gured, but you
can change the settings to suit your individ-
ual requirements.
Setting the date and time
E Press the key to open the dis-
play menu. The Date/Time sym-
bol ashes.
E Press the key again to start the
date and time settings.
r
Press the right/left control key
to change the input position
and correct an entry.
~ Enter the month and day as a
4-digit number via the keypad,
e.g.
09/. The date format depends
on your country settings.
~ Enter the hours and minutes in
4-digit format via the keypad,
e.g.
for 07:15 am.
q Press the up/down key to switch
between the 12- and 24-hour
time formats.
E Press the key to save your set-
tings.
You will hear a con rmation tone and the
display will automatically return to idle
mode.
Setting the earpiece and
speaker volume
You can set the loudspeaker volume for
handsfree talking and the earpiece volume
to ve di erent levels during a call.
Setting the earpiece volume
r
Setting the speaker volume
r

Setting the ringer

You can set the ringer volume to six di erent
for 26/
levels and select a ringtone.

Setting the ringer volume

In idle status:
u / v
L0....L5
When the ringer volume is set to L0 (o ), L0
is displayed and the ô symbol appears in
the display.
The ringer volume can also be adjusted dur-
ing an incoming call, but this setting is not
permanent.
Base settings
Set the earpiece volume; the
level (L1... L5) is displayed.
Set the speaker volume; the
level (L1... L5) is displayed.
Press the left or right control
key.
The volume level currently set is
shown. The ringer melody cur-
rently set is replayed.
23