Connecting The Telephone To The Pabx; Changing The Dialling Mode; Setting Recall - Gigaset C330 Owner's Manual

Connecting the telephone to the PABX

The following settings are only necessary if
your PABX requires them; see the PABX user
guide. The settings can only be made via a
registered handset

Changing the dialling mode

The following dialling modes can be
selected:
u
Tone dialling (DTMF)
u
Pulse dialling (DP)
¢
§§Menu§§
System Setting
¢
Features Dialing Mode
q Select the dialling mode and
§OK§
press

Setting recall

Recall speci es the ash time (break) used
for tone dialling when a recall (e.g. a consul-
tation call) is activated. Your phone is preset
at the factory for operation on the main con-
nection. For operation on a PABX, you may
have to change this value. Please refer to the
user guide for your PABX.
¢
§§Menu§§ System Setting
¢
Features Flash Time
q Select the recall time and press
§OK§ .
Possible values are:
80 ms, 100 ms, 120 ms, 180 ms,
250 ms, 300 ms, 600 ms, 800 ms.
Setting an automatic pre x
You can set a pre x which is automatically
added to a phone number with at least 5
digits. This pre x can be used to dial into the
outside line when operating the device on a
PABX. A pause is added automatically after
the pre x.
The number must be dialled in idle mode, i.e.
rst then d.
~
¢
Add.
.
¢
Add.
Connecting the telephone to the PABX
Activating/deactivating the
automatic pre x
¢
§§Menu§§
System Setting
¢
Activation
Select On or O and press
q
Setting the pre x number
¢
§§Menu§§ System Setting
¢
Pre x No.
~
Enter the pre x number and
§OK§
press
Example: Auto Pre x = On and set to 65
You dial Actually dialled number
1234 1234
12345 65P12345
#12345 65P#12345
Temporarily switching to
tone dialling (DTMF)
If your PABX still operates with dial pulsing
(DP), but you need tone dialling for a con-
nection (e.g. to listen to a network mail box)
you must switch to tone dialling for the call.
Requirement: You are conducting a call or
have already dialled an external number.
During the call:
*
Press the star key.
After the call is ended, dial pulsing is auto-
matically activated again.
¢
Auto Pre x
§OK§
¢
Auto Pre x
.
.
43