Quick Dialling; Making An External Call; Making Calls; Ending A Call - Gigaset C330 Owner's Manual

Making calls

You make a call using the phone's receiver or
the speaker.

Making an external call

External calls are calls using the public tele-
phone network.
~P Enter the number and lift the
receiver.
Or:
P ~
Lift the receiver and then enter
the number.
The number is limited to 24 digits.
Instead of using the receiver:
ø Press the speaker key to make a
call via the speaker. The LED
lights up permanently.
You can also switch at any time during the
call. Throughout the whole of this section,
the P (or ) symbol can always represent
ø.
If the line is in use by a handset Line In Use is
displayed.

Quick dialling

You can dial a number directly via a digit key
to 9,
provided a number stored in the directory
has been assigned to the digit key using the
handset,
When the base is in idle status:
¤
Press and hold the digit key.
The number is dialled immediately.

Ending a call

Put down the receiver, or press
the speaker key ø if the call
was made handsfree.

Accepting a call

The base indicates an incoming call in three
ways: by ringing, by a display on the screen
and by the ashing talk LED.
You can accept the call by:
¤
Lifting the receiver P.
¤
Pressing the speaker key ø to make
the call handsfree.
To deactivate the ringtone, press the *
key. You can accept the call as long as it is
displayed on the screen.
Calling Line Identi cation
(CLI)
Calling Line Identi cation is a telephony
service that transmits caller identi cation
information (name or number). When you
receive a call, the caller's number is dis-
played on the screen according to the fol-
lowing rules:
Number is transmitted
If the number is transmitted it is displayed.
If the number exceeds 24 digits, only the rst
24 digits are displayed.
Number is not transmitted
The base rings but nothing is displayed.
Making calls
17