Handset Settings; Base Station Settings - Gigaset A160 Manual

Listening in to an external call
You are conducting an external call. An internal
caller can listen in on this call and take part in the
conversation. All the participants are made aware
of the 'listening in' by a beep.
Precondition: The Listening in function must be
activated.
Activating/deactivating internal listening in
¢ ¢
MENU Settings
¢ ¢
Listening in OK
Internal listening in
You want to listen in to an existing external call.
Press and hold the talk key
the call. All participants hear a beep.
To end: press the end call key
hear a beep.
If the first internal participant presses the end call
a
key , the handset that has 'listened in' remains
connected to the external caller.

Handset settings

Change display language
¢ ¢
MENU Settings
¢ ¢
OK
Language
¢
OK
The current language is indicated by
If you accidentally choose a language you do not
understand:
¢
MENU 3 2 1 (Press the keys one after the other)
Select the correct language with
Setting the alarm clock
Activating/deactivating the alarm clock
¢
MENU Alarm Clock
¢
‰
OK ( = on)
Or: Press the alarm clock key
When the alarm clock rings, press any key to switch
it off for 24 hours.
Setting the wake up time
¢
MENU Alarm Clock
¢
OK
Enter the wake up time in hours and minutes, then
press OK.
¢ ¢
OK OK
Base
‰
( = on)
c
. You are linked into
a
. All participants
¢ ¢
OK
Handset
¢
Select the language
‰
.
u
and press OK.
¢ ¢
OK
Activation
g
.
¢ ¢
OK
Wake-up time
8
Resetting the handset
You can reset any individual settings and changes
that you have made. Entries in the directory, the
calls list and the handset's registration on the base
station will be retained.
¢
MENU
¢
Reset Handset
Cancel the reset with

Base station settings

The base station settings are carried out using a
registered handset.
For details on how to set the system PIN for the
base station, and for how to select the ringtone
volume and melody on devices with answering
machines, see Menu tree, page 11.
Restoring the base station to the factory
settings
When the settings are restored all handsets are de-
registered. The individual settings are reset. Only
the date and time are retained.
¢
MENU
¢
Base Reset
OK
If you have forgotten your system PIN you can reset
the base station to the original code 0000:
Disconnect the power cord from the base station.
Hold down the registration/paging key
(page 1) on the base station while reconnecting
the power cable to the base station at the same
time. If your device has an answering machine you
will also hear a beep. The base station has now
been reset and the system PIN 0000 set.
¢ ¢
OK
Settings Handset
¢
OK
a
.
¢ ¢
OK
Settings Base
¢
OK
¢
OK
¢
OK
÷ ù
or