15-Pin Serial Port Connector; Attaching The Handstrap - Symbol PDT 8100 Series Quick Reference Manual

Q u i c k

15-Pin Serial Port Connector

To connect to the Micro-D RS-232 port at the top of the terminal,
use an ITT Cannon brand mil-spec connector (MDM-15SSB) with
captivated jack screws (mil p/n M83513/5-6) to protect the
connector's contacts from damage during insertion and removal.

Attaching the Handstrap

R e f e r e n c e
1. Install the plastic
clip on the back of
the terminal using
the screw.
2. Slide the end of the
strap into the notch-
es on the bottom of
the battery door.
3. Slip the top of the
strap through the
plastic clip on the
back of the terminal
and adjust as nec-
essary.
9