Placing Originals On The Exposure Glass - Ricoh Aficio MP 1800 Operating Instructions Manual

Placing Originals on the Exposure Glass

Place originals on the exposure glass.
Important
❒ Do not lift the exposure glass cover, ADF, or ARDF forcefully. Otherwise, it
will be damaged, or the cover of the ADF or ARDF might open.
A
Lift the exposure glass cover, ADF, or ARDF.
Be sure to lift the exposure glass cover, ADF, or ARDF by more than 30 degrees.
Otherwise, the size of the original might not be detected correctly.
B
Place the original face down on the exposure glass. The original should be
aligned with the rear left corner.
Start with the first page to be copied.
1 Positioning mark
2 Left scale
C
Lower the exposure glass cover, ADF, or ARDF.
AAI025S
Placing Originals
1
13