Fx Ddm Status - KTI Networks KGS-0841-W User Manual

4.5.2 FX DDM Status

DDM (Digital Diagnostic Monitoring) information and status are provided in some transceivers. Part of the
information are retrieved and listed as follows:
___________________________________________________________________________________________________________________________________________________
Information
___________________________________________________________________________________________________________________________________________________
Port
Identifier
Connector
SONET Compliance
GbE Compliance
Vendor Name
Vendor OUI
Temperature
Voltage
TX Power
___________________________________________________________________________________________________________________________________________________
[Refresh]
[Back]
___________________________________________________________________________________________________________________________________________________
Note:
1. TX power data is displayed with unit of dBm.
2. N/A: the information is not available in the transceiver
Function
Port number which has fiber interface
The identifier information of the fiber transceiver
The connector type used on the fiber transceiver
SONET compliance information of the transceiver
Gigabit Ethernet compliance information of the transceiver
The vendor name of the transceiver
The vendor OUI of the transceiver
The current temperature sensed inside the transceiver
The working voltage sensed inside the transceiver
The transmission optical power sensed
Click to refresh current configuration
Click to back to previous page
-61-