Qos Service Policy - KTI Networks KGS-0841-W User Manual

4.12.4 QoS Service Policy

___________________________________________________________________________________________________________________________________________________
Configuration
___________________________________________________________________________________________________________________________________________________
Port
Policy
___________________________________________________________________________________________________________________________________________________
[Apply]
[Refresh]
[Back]
___________________________________________________________________________________________________________________________________________________
Notes:
1. Queue with higher class number has higher priority than queue with lower class number. That means
Class 3 > Class 2 > Class 1 > Class 0 by default.
2. In weighted ratio policies, a weighted fairness round robin service is guaranteed normally. However, when
excess bandwidth exists higher class queue will take advantage on bandwidth allocation.
Description
Port number
Service policy for egress priority among four egress class queues
Strict priority - high class queue is served first always till it is empty
Weighted ratio priority Class 3:2:1:0 = 4:3:2:1 - weighted ratio 4:3:2:1
Weighted ratio priority Class 3:2:1:0 = 5:3:1:1 - weighted ratio 5:3:1:1
Weighted ratio priority Class 3:2:1:0 = 1:1:1:1 - weighted ratio 1:1:1:1
Click to apply the configuration change
Click to refresh current configuration
Click to go back to upper menu
-96-