4.5.2 SFP DDM Status
DDM (Digital Diagnostic Monitoring) information and status are provided in some SFP transceivers.
Part of the information are retrieved and listed as follows:
Information
Port
Identifier
Connector
SONET Compliance
GbE Compliance
Vendor Name
Vendor OUI
Temperature
Voltage
TX Power
[Refresh]
[Back]
Note:
1. TX power data is displayed with unit of mW. It can be converted to dBm as remark.
2. N/A: the information is not available
Function
Port number which has SFP slot (Port 4, Port 5, Port 6 come with SFP.)
The identifier information of the transceiver
The connector type used on the transceiver
SONET compliance information of the transceiver
Gigabit Ethernet compliance information of the transceiver
The vendor name of the transceiver
The vendor OUI of the transceiver
The current temperature sensed inside the transceiver
The working voltage sensed inside the transceiver
The transmission optical power sensed
Click to refresh current configuration
Click to back to previous page
-39-