Installing An Optional Fiber Module; Enable 100Base-Fx Module - KTI Networks KS-280 Installation Manual

2.4 Installing an Optional Fiber Module

In addition to the RJ-45 connector, Port #8 also provides one fiber mod-
ule slot which can accommodate one optional fiber module. This design
allows Port #8 to support either one 10BASE-T/100BASE-TX UTP con-
nection or one 100BASE-FX fiber connection.
Available optional fiber modules
•
100BASE-FX module for multimode fiber with ST connectors
•
100BASE-FX module for multimode fiber with SC connectors
•
100BASE-FX module for single-mode fiber with SC connectors
For more information, refer to Appendix-A.
Procedure to install an optional fiber module
1. Turn off the power to the unit.
2. Enable 100BASE-FX module as illustrated in the following figure:
Figure 2-4 Enable 100BASE-FX Module
7