Multi Ring - KTI Networks KGS-0841-W User Manual

4.14 Multi Ring

___________________________________________________________________________________________________________________________________________________
Configuration
___________________________________________________________________________________________________________________________________________________
Ring Group 1 -4
Ring Port 1, 2
Backup Port
Ring Group ID
___________________________________________________________________________________________________________________________________________________
[Apply]
[Refresh]
___________________________________________________________________________________________________________________________________________________
Notes:
1. One switch provides two ports to support one redundant ring. As a slave switch, both ports are configured
<Ring Port>. To be a master of a ring, one port must be set to <Backup Port>.
2. Only one backup port is configured among the member switches in a redundant ring.
3. One switched port can only be configured either Multi Ring enabled or RSTP enabled.
Description
Up to four redundant rings supported in one switch
Two ring ports are needed to support one redundant ring.
Check to specify the ring port as a backup port.
One unique ID is assigned for the associated ring group. The ring group ID should be
same for all switch members in the associated ring.
Click to apply the configuration change
Click to refresh current configuration
-98-