KTI Networks KGS-0841-W User Manual page 65

VLAN Group Table Configuration
The switch provides a table of eight VLAN groups to support up to eight VLANs at the same time. Each
VLAN group is associated to one unique VLAN. The table is referred for VLAN classification.
A VLAN group contains the following configuration settings:
VID:
Member Ports:
Source Port Check:
VLAN Classification
VLAN classification is a process to classify a VLAN group to which a received packet belongs. The VID of the
generated Packet Tag information associated to the received packet is used as an index for VLAN group table
lookup. The VID matched VLAN group will be used for packet forwarding. If no matched VLAN group is
found in table lookup, the packet is dropped.
Refer to section 4.6.1.7 for details of how Packet Tag information is generated.
The member ports specified in the matched VLAN group are the admitted egress port range for the packet. The
packet will never be forwarded to other ports which are not in the member ports.
The Source Port Check setting of the matched VLAN group is also referred. If it is enabled, the ingress port
will be checked whether it is a member port of this group.
Packet Forwarding
The forwarding is a process to forward the received packet to one or more egress ports. The process uses the
following information as forwarding decision:
Member ports of the matched VLAN group: the egress port range for forwarding
Source Port Check setting of the matched VLAN group: check ingress port membership
The packet destination MAC address: for MAC address table loop up
The switch MAC address table: to find the associated port where a MAC address is learned
If the MAC address table lookup is matched and the learned port is the VLAN member port, the packet is
forwarded to the port (egress port). If the lookup failed, the switch will broadcast the packet to all member
ports.
12-bit VLAN Identifier index to the VLAN to which the group is associated
The admitted egress ports for packets belonging to this VLAN
Tthe ingress port of the packet must also be the member port of this VLAN. Otherwise,
the packet is discarded.
-65-