Port-Based Vlan Isp Mode - KTI Networks KGS-0841-W User Manual

4.6.3 Port-based VLAN ISP Mode

___________________________________________________________________________________________________________________________________________________
Configuration
___________________________________________________________________________________________________________________________________________________
Joint port
___________________________________________________________________________________________________________________________________________________
[Apply]
[Refresh]
[Back]
___________________________________________________________________________________________________________________________________________________
Example:
If Port 8 is selected as the joint port, the 7 port-based VLAN groups are configured as follows automatically:
Group 1 - member [Port 1, Port 8],
Group 3 - member [Port 3, Port 8],
Group 5 - member [Port 5, Port 8],
Group 7 - member [Port 7, Port 8]
Mode Operation:
1. The joint port is the shared member port for all groups.
2. Two member ports are configured in each group.
3. The member ports in same group can communicate with other only.
4. No packet tag is examined.
5. A received packet will not be modified (i.e. tagging or untagging) through VLAN operation till it is
transmitted.
Note:
The seven groups are configured with associated VID 1 ~ 7 respectively by the system.
Description
Select a port as the joint port for all 7 port-based VLAN groups
Click to apply the configuration change
Click to refresh current configuration
Click to go back to upper menu
Group 2 - member [Port 2, Port 8]
Group 4 - member [Port 4, Port 8]
Group 6 - member [Port 6, Port 8]
=>
-68-