Table of Contents
Advertisement
4.7 LACP
___________________________________________________________________________________________________________________________________________________
Configuration
___________________________________________________________________________________________________________________________________________________
Port
Protocol Enabled
Key Value
__________________________________________________________________________________________________________________________________________________
[Apply]
[Refresh]
___________________________________________________________________________________________________________________________________________________
Notes:
1.
This configuration is used to configure LACP aggregate groups.
2.
The ports which have same key value are in same LACP aggregate group.
3.
The ports with Auto key are in same LACP aggregate group.
4.
The ports configured in non-LACP aggregation are not available in this configuration.
Description
Port number
Enable LACP support for the port
An integer value assigned to the port that determines which ports are aggregated into
an LACP link aggregate. Set same value to the ports in
same LACP link aggregate. Value: 1 ~ 255.
Auto - key value is assigned by the system
Click to apply the configuration change
Click to refresh current configuration
-82-
Advertisement
Table of Contents
