Reboot System; Restore Default; Update Firmware - KTI Networks KGS-0841-W User Manual

4.23 Reboot System

This menu is used to reboot the switch unit remotely with current configuration. Starting this menu will make
your current http connection lost. You must rebuild the connection to perform any management operation to
the unit.

4.24 Restore Default

This menu is used to restore all settings of the switch unit with factory default values. Note that this menu
might change the current IP address of the switch and make your current http connection lost.

4.25 Update Firmware

This menu is used to perform in-band firmware (switch software) upgrade. Enter the path and file name of new
firmware image file for uploading.
___________________________________________________________________________________________________________________________________________________
Configuration
___________________________________________________________________________________________________________________________________________________
Filename
___________________________________________________________________________________________________________________________________________________
[Browse]
[Upload]
___________________________________________________________________________________________________________________________________________________
Description
Path and filename (warp format)
Click to browse your computer file system for the firmware image file
Click to start upload
-111-