KTI Networks KGS-0841-W User Manual page 59

Mode
Flow Control
PoE Enable
Drop frame after excessive collision
___________________________________________________________________________________________________________________________________________________
[FX DDM]
[Port Type]
[Apply]
___________________________________________________________________________________________________________________________________________________
Above port configuration example illustrates that both Port #7 and Port #8 are equipped with two media
interfaces, M12 copper interface and FX fiber interface. Click [Port Type] button to select preferred media
type.
Down with red background - port is link down
Select port operating mode
Disabled - disable the port operation
Mode Auto-negotiation
Auto Enable
10 Half Disable
10 Full Disable
100 Half Disable
100 Full Disable
1000 Full Enable
Auto 1000 Full Enable
Force 1000 Full Disable
Set port flow control function
v - set to enable 802.3x pause flow control for ingress and egress
Set port PoE PSE function
v - set to enable port PoE PSE function (Optional model-dependent function)
v - set to enable the function
Click to display DDM information and status of the fiber transceivers
Click to set port media type, <M12> or <Fiber> for Port 7 and Port 8 options
Click to apply the configuration change
Speed capability
10, 100, 1000M
10M
10M
100M
100M
1000M
1000M
1000M
-59-
Duplex capability
Full, Half
Half
Full
Half
Full
Full
Full
Full