Installing Or Replacing The Tape Drive - Lenovo ThinkServer RD650 User Manual And Hardware Maintenance Manual

7. Slide the new optical drive into the optical drive bay from the front until it snaps into position.
Figure 174. Installing the optical drive
8. Connect the connector
Figure 175. Connecting the connector
9. If you are instructed to return the old optical drive, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to "Completing the parts replacement" on page 193.

Installing or replacing the tape drive

Note: This topic applies to server models with 2.5-inch-drive bays.
This topic contains the following information:
• "Installing the tape drive" on page 177
176
ThinkServer RD650 User Guide and Hardware Maintenance Manual
1
to the rear of the optical drive.
1
1
to the rear of the optical drive