Lenovo ThinkServer RD650 User Manual And Hardware Maintenance Manual page 157

Figure 123. Opening the handle of a drive
3. Pull the handle and carefully slide the drive or the dummy tray out of the chassis.
Figure 124. Removing the drive
Figure 125. Removing the dummy tray
4. Touch the static-protective package that contains the new drive to any unpainted surface on the outside
of the server. Then, take the new drive out of the package.
Note: Do not touch the circuit board on the drive.
5. Slide the new drive into the drive bay from the front until it snaps into position. Then, completely
close the handle.
.
Chapter 6 Replacing hardware
143