Lenovo ThinkServer RD650 User Manual And Hardware Maintenance Manual page 90

b. Grasp the top of the system fan with your index finger and thumb and then lift the system fan
out of the server.
Figure 46. Removing the system fan
3. Touch the static-protective package that contains the new system fan to any unpainted surface on the
outside of the server. Then, remove the new system fan from the package.
4. Position the new system fan above the system fan cage so that the system fan connector on the bottom
of the new system fan is facing the rear of the chassis. Then, press the new system fan straight down
until it is seated into place.
Figure 47. Installing the system fan
5. If you are instructed to return the old system fan, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to "Completing the parts replacement" on page 193.
76
ThinkServer RD650 User Guide and Hardware Maintenance Manual